No-shaft Mud Cake Conveyor for Sludge Dehydrating System
Product Description
Product Description of Mud Cake Conveyor
BOEEP Mud Cake Conveyor utilizes the rotation of the helical axis in the U-groove to achieve the delivery of material. It is no-shaft and not interfered by the central axis, which has special advantages for winding materials. It is used to transport grid removed from sewage screening device and dewatered mud cake. It has good environmental protection performance for it uses totally enclosed conveying and easy cleaning spiral surface, which can ensure environmental hygiene and the materials delivered are free from contamination and leakage. The torque is large and the energy consumption is low. Because the screw has no shaft, the material is not easy to be blocked and the discharge port is not blocked, the screw can operate at a lower speed, drive smoothly and reduce energy consumption. According to the standard of JB/T679-95 screw conveyor, BOEEP mud cake conveyor has the characters of high reliability, long lifetime, good applicability, convenience to install and maintain. The temperature of materials can reach up to 100℃， the biggest dip angle can be up to 30°.
Structure of Mud Cake Conveyor
The mud cake conveyor is mainly composed of driving device, head assembly, shaft-less screw, groove liner, inlet, outlet, cover (when needed), base, etc.
1-The driving device adopts helical gear reducer. The reducer is opposite to the outlet when horizontal and the reducer is at the outlet when inclined.
2-The cabinet is U, and the upper part is covered with rain proof machine cover. The material is stainless steel or carbon steel.
3-Non - axial spirals: stainless steel or 16Mn.
4-Trough lining: nylon or polyethylene plate, nylon material.
5-There are two kinds of inlet and outlet: the square and the round. The form of general inlet and outlet is decided by the user and the square is the main one.
Features of Mud Cake Conveyor
Fully automatic electic protection can be co-controlled with sludge dewatering system.
Compact structure, convenient installation with expansion bolts.
Using wear-resisting material in the inner layer of trough, its examining and repairing is convenient.
Closed running make the noise low and surroundings better.
Its length, angle and dischargeinig hopper can be manufactured according to customer's requirements.
The flight is made of stainless steel which is strong enough and anti-corrosive.
Technical Specification of Mud Cake Conveyor
Note:
1- The power in the table is corresponding to: L=6M. Moisture of the sludge medium is 80%.
2- The installation angles referring to the angle between spiral axis and ground.
Product Details of Mud Cake Conveyor
Object Site of Mud Cake Conveyor