Continuous Belt Press Dewatering Machine for Anaerobic Digested Sludge Waste
Product Description
Product Introduction
BOEEP belt press dewatering machine has two part. One part is the pre-thickening part is a rotary drum, which has the function of concentration. The other part is belt press part, which completes the dehydration task. This machine is mainly used for processing the sludge which is not concentrated in the thickening pool (such as A/O residual sludge).
Structure & Working Principle
BOEEP belt press dewatering machine is composed of conditioning tank, concentrating rotary drum and belt filter, when the flocculated sludge is fed into the rotary thickening drum, the thickened sludge flows from the rotary drum gap, washing device is set on the top of the rotary drum, which is to wash the drum. After being thickened, the sludge is distributed and feed onto the filter belt thoroughly. After pressed by the gravity dewatering zone, wedge compression zone, pre-pressing dewatering zone, low pressure dewatering zone, middle pressure dewatering zone, high pressure shear dewatering zone etc, the presser is put onto the sludge along the belt forwarding direction consistently, and the sludge cake will be output at the outlet port.
Features
The principal part adopts stainless steel as its material and possesses high strength for it is rust-less.
The filter cloth imported from Germany, which provides the best performance and long service life.
Automatic cylinder deviation correction system effectively prevents filter cloth deviation. The safety alarm device and limit deviation controlling improve filter cloth life and reduce maintenance costs.
Great product capability, good washing effect, flexible operation, low containing moisture in cake.
Low energy consumption, high efficiency, low revolutions, low noise.
Safety system monitors the entire working environment, and automatic stopping devices satisfies the need of operation security.
Technical Parameters
| Model：ZDY1.5 | Filter belt width (mm)：B=1500mm |
| Capacity (m3/hr)：Q=8-15m3/h | D.S. Dried Sludge （kg/h）：110-200kgds/hr |
| Sludge cake moisture content (%)：75-85% | Press section filter belt speed (m/min)：1-7m/min |
| Motor power：1.85kw | Motor protection grade：IP55 |
| Motor insulation level：F | Power：380V，50HZ，3 |
| Flushing quality (m3/hr)：15m3/h | Flushing pressure (MPa)：0.6Mpa |
| Gas cylinder pressure：0.45Mpa | Speed control mode of driving mode：Frequency control |
Specification & Model Data
Product Details
Project Site