Precautions for sludge dryer in trial operation and installation

The sludge dryer is equipment specially designed for the treatment of sludge with high moisture content. The low-temperature container sludge dryer can realize the dewatering and drying of sludge in a short time, to facilitate subsequent sludge treatment and disposal, so it is very popular in all walks of life. Next, let's take a look at the precautions of sludge dryer in trial operation and installation. Here are some answers.

Here is the content list:

Six points to pay attention to when the sludge dryer is commissioned.

Matters need attention in the installation of a sludge dryer.

Six points to pay attention to when the sludge dryer is commissioned.

First, it is required that the continuous running time of the sludge dryer dry running should not be less than 12 to 24 hours, and the problems in the running process need to be solved in time. Second, the load test operation can be carried out when the dry run test machine is normal, and the load test operation needs to be carried out in stages. In the process of the load operation, feeding should be carried out according to the discharge situation to prevent unnecessary wear of the steel ball and cylinder liner. Third, the increase in the load and the length of the test run time need to be confirmed according to the running-in conditions of the large and small gears and the reducer gears. If the tooth surface contact accuracy cannot meet the design requirements, the full-load operation is prohibited. Fourth, keep the cooling and lubrication system in the low-temperature belt sludge dryer test running normally. The temperature of the main bearing, transmission bearing, and reducer remains normal. Fifth, after adding two-thirds of the number of steel balls for 24 to 48 hours of trial operation, all bolts should be checked and tightened again. Sixth, in the process of trial operation, it is necessary to carefully make various records.

Matters need attention in the installation of a sludge dryer.

The sludge dryer is mainly used to dry the sludge. There are still many precautions for installation. Detailed analysis and understanding are required. Then what matters should be paid attention to during the installation of the sludge dryer? First, install the sludge dryer. At the time, it is very necessary to pay attention to the terrain. To ensure its satisfaction in the terrain, it is necessary to research the terrain. It can reduce the interference of the environment to its use, ensure its quality, ensure that its quality meets the demand, and ensure the effect. Second, in the process of installing the Low-temperature sludge dryer, you also need to pay attention to the electricity requirements. When using electricity, you need to ensure safe use and take waterproof measures to reduce hidden safety hazards during use. Thirdly, it is necessary to clean the sludge dryer and pay attention to cleaning the equipment and website, to ensure a smooth installation, reduce operator intervention, and ensure quality.

If you are interested in a sludge dryer or low-temperature waste heat sludge dryer, you can contact us, our website is https://www.chinaboeep.com/, welcome your visit, and look forward to cooperating with you.